PETRA

Round recessed luminaire for outdoor installation in the ground.

Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). AISI 316L stainless steel frame.

Double layer coating for high resistance to corrosion

Tempered transparent or sandblasted glass (no-slip glass VA on request) and moulded silicone gasket.

Protection Rating: IP67

In compliance with EN 60598-1

Class of insulation: I

Installation: the luminaire is equipped with one M20 plastic cable gland (<ø13mm) and a piece of cable for an easy-to-make connection. Outdoor use requires suitable flexile cables assuring the watertightness of the cable gland. Installation requires a dedicated box to be ordered separately. It is important to provide a >400mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.

We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.

HIT-CE G12

article light source, socket / watt per lamp pivotable colour connection voltage
PET-3500 HIT-CE G12 / 35 W - stainless steel 230 V
PET-7000 HIT-CE G12 / 70 W - stainless steel 230 V
PETS-3500 HIT-CE G12 / 35 W 10 ° stainless steel 230 V
PETS-7000 HIT-CE G12 / 70 W 10 ° stainless steel 230 V

POWER LED

article light source, socket / watt per lamp pivotable colour temperature luminous flux colour
PETS-9NW0 POWER LED / 1,50 W 10 ° 4000 K 730 lm stainless steel
PETS-9NW0F POWER LED / 1,50 W 10 ° 4000 K 723 lm stainless steel
PETS-9WW0 POWER LED / 1,50 W 10 ° 3000 K 586 lm stainless steel
PETS-9WW0F POWER LED / 1,50 W 10 ° 3000 K 580 lm stainless steel
Back